Appendix

Viewing the Event Log

The event log shows a list of system events.

From the Home screen, select Configure > System > System Information > Event Log.

Saving System Information to a Memory Card

You can save system information to a memory card as a troubleshooting tool. A Garmin Product Support representative may ask you to use this information to retrieve data about the marine network.

1.Insert a memory card into the SD card slot on the chartplotter.

2.Select Configure > System > System Information > Save to Card.

3.Remove the memory card.

Restoring the Original Chartplotter Factory Settings

Note: This procedure deletes all settings information you have entered.

1.From the Home screen, select Configure > System > System Information > Factory Settings > Reset.

2.Select Yes.

Communication with Wireless Devices

Connecting a Wireless Device

You can allow wireless devices, such as a remote control or an optical mouse, to communicate with the chartplotter.

From the Home screen, select Configure > Communications > Wireless Devices > New Connections > Yes.

Disconnecting a Wireless Device

1.From the Home screen, select Configure > Communications > Wireless Devices.

2.Select a wireless device.

3.Select Disconnect.

Garmin Marine Network

The Garmin Marine Network allows you to share data from Garmin peripheral devices with Garmin chartplotters quickly and easily. You can connect a GPSMAP 6000/7000 series chartplotter to a Garmin Marine Network to receive data from and share data with other Marine Network-compatible devices and chartplotters.

Transferring Data over the Garmin Marine Network

See “Chartplotter Data Management” (page 69).

Configuring Networked Devices

See “Networked Device Configuration” (page 71).

116

GPSMAP® 6000/7000 Series Owner’s Manual