Getting Started
Turning On the Chartplotter
Press and release the
Power key.
Turning Off the Chartplotter
Press and hold the
Power key.
Initial Chartplotter Settings
The first time you turn on the chartplotter, you must configure a series of initial settings. These settings must also be configured when restoring original factory settings (page 116). Each of these settings can be updated later. Follow the
Note: To calibrate the water speed, you must have a
GPS Satellite Signal Acquisition
When you turn on the chartplotter, the GPS receiver must collect satellite data and establish the current location. When the chartplotter acquires satellite signals, the signal strength bars at the top of the Home screen are green 
. When the chartplotter loses satellite signals, the green bars disappear 
and a flashing question mark appears on the boat icon on the chart screen.
For more information about GPS, visit the Garmin Web site at www.garmin.com/aboutGPS.
Adjusting the Backlight
1.From the Home screen, select Configure > System > Beeper/Display > Backlight > Backlight.
2.Adjust the backlight:
•Select Auto to allow the chartplotter to adjust the backlight automatically, based on ambient light.
•Select Up or Down to adjust the backlight manually.
Adjusting the Color Mode
1.From the Home screen, select Configure > System > Beeper/Display > Color Mode.
2.Select Day Colors, Night Colors, or Auto.
GPSMAP® 6000/7000 Series Owner’s Manual |