Installation Of Handheld
The handheld connects to # 3 at the ECU. The handheld comes with a standard 18’ cable. It can be extended in length by using extensions. These are available in three lengths; 10 ft, 20 or 30 ft.
Corded Mount
Corded Mount:
Different options are available.
Fig. 29
Mic Clip Part Numbers:
White 120-2043-03
Black 120-2043-02
Flush Mount:
Remove the back cover of handheld. Using the back of the handheld as a guide drill 2 1/4” holes into your dash. Drill a 3rd 5/8” hole in the center of those holes for the cord and pico connector to go through. Mount the handheld using the existing nuts you removed from the back. If your dash is too thick, you will need to use thread extenders. See Fig. 30 & Fig. 31. Those can be purchased separately.
Flush Mount
Thread Extender kit comes in (2) lengths. 1/2” or 1”.
Part Numbers:
1/2”:
1” :120-2045-04
Extender Kit
Fig. 30
Fig. 31
22
