14
Chapter 2: Quick Start
www.gateway.com
Installing the data cartridges
Before you use the autoloader, you must install the data cartridges. For
more information on data cartridges, see “Data cartridges” on page 27.
To install the data cartridges:
1Press any button on the Operator’s Panel to change to interaction mode.
2Select the Commands menu, then press ENTER.
3Select Import, then press ENTER.
4Enter the number of the cartridge slot, then press ENTER.
5Insert the cartridge in the cartridge access port. The cartridge is now placed
in the selected slot.
6Repeat Steps 4 and 5 until all cartridges have been installed.
Warning The t ape drive only operates with LTO-1 Ultrium tape data
cartridges. The cartridges are available in 100/200GB
size. Attempting to use other types of cartridges may
damage the tape drive.