24
Chapter 3: Setting Up the Autoloader
www.gateway.com
Securing the autoloader

To secure the autoloader to the cabinet:

1From the front of the cabinet, position the autoloader on the shelf flanges
between the support rails. Slide the autoloader toward the back of the
cabinet until the brackets contact the cabinet’s mounting holes. Make sure
that the tabs on the back of each shelf flange are fully engaged in the slots
at the back of the autoloader.
2Place one screw from the cabinet mounting kit into the hole in the front
of each bracket. If your cabinet has square mounting holes , or the hole s
are larger than the screws provided in the kit, use the clip-nuts to secure
the screws. Use a #2 Phillips screwdriver to tighten the screws.
POWE
R
MENU-+SELECT