
www.gateway.com
3Remove the bezel lock keys from the inside of the bezel, then insert the left side of the bezel into the left handle and swing the right side of the bezel in until it snaps into place.
4When the bezel is in place, lock the bezel by inserting the key into the lock in the lower right corner of the bezel and turning it clockwise until it stops.
5Put the key in a safe place.
Removing the server from a cabinet To remove the server from a cabinet:
Warning
Screws are required to support the front and back of the server. You must support the server while removing the front screws and back screws. If the server is not supported, damage to the server or injury may result.
1While supporting the server, remove the front and rear mounting screws that hold the server in the cabinet.
2Remove the server from the cabinet.
15