CHAPTER 4: Installing Components

7Press down the two blue retaining clips (1) on the sides of the top front cover, then slide the top front cover back (2) and lift it off the server.

Caution

For correct cooling and air flow, always reinstall the top covers before you turn on the server. Operating the server without the covers in place will cause the server to overheat.

Closing the server case

Important

The hard drive carriers shown in these illustrations may look different than the actual hard drive carriers in your server.

To close the server case:

1Make sure that all of the internal cables are arranged inside the case so they will not be pinched when you close the case.

2Place the front top cover on the case and slide the cover forward, then lift the two blue retaining clips into place.

3Place the rear top cover (1) on the case, then slide it forward until it clicks into place.

30