CHAPTER 4: Installing Components
5Remove the screw (1) at the front of the top cover, then press and hold the release button
(2).
Caution
For correct cooling and air flow, always reinstall the top covers before you turn on the server. Operating the server without the covers in place will cause the server to overheat.
Important
The hard drive carriers shown in these illustrations may look different than the actual hard drive carriers in your server.
6Slide the top cover (3) toward the back of the case, then lift it off the case.
7Move the fixed tabs (right and left) toward the middle of the server, then slide the front top cover (2) toward the back of the server and lift it off.
26