
www.gateway.com
6Loosen the thumbscrew (1), then lift the distribution module slightly and move it toward the front of the case (2) to release it from the three locking tabs.
7Lift the power distribution board (3) out of the chassis.
8Insert the new power distribution board into the chassis, then move it toward the back of the chassis to engage the three locking tabs.
9Tighten the thumbscrew to secure the power distribution board in the chassis.
10Reconnect the power cables. See “System board” on page 5 for the location of the connectors on the system board.
11Replace the system fan cage and fan duct by following the instructions in “Replacing system fans” on page 38.
12Reinstall the PCI riser assembly by following the instructions in “Installing and removing PCI expansion cards” on page 34.
13Follow the instructions in “Closing the server case” on page 27.
45