CHAPTER 4: Installing Components

5Lift one side of the fan cage (2) and disengage the retention tab (3), then disconnect the fan power and fan tach cables from the system board and remove the fan cage from the chassis.

6Insert the fans into the new fan cage.

Important

Make sure that the arrows on top of the fans indicating airflow point to the back of the chassis.

7Connect the fan power and fan tach cables to the system board, then insert the retention tab (1) into the corresponding clip on the chassis and push the other side of the fan cage down (2), making sure that the retaining clip is inserted into the hole in the chassis.

8Replace the fan duct by placing it into the chassis.

9 Follow the instructions in “Closing the server case” on page 27.

40