GBC 1264WF/1244WF

Operation Manual

 

 

Safety Shield-Continued

To remove the Safety Shield, first raise the shield and locate the spring hinge pin on the right side of the shield. Pull the pin to release the shield from the laminator as illustrated in the photo.

Feed Table

The Feed Table supports the product to be laminated. It also prevents full access to the roller nip (where the upper and lower roller meet) of the laminator. Because of this the laminator has been designed not to operate when the Feed Table is removed. Re-install the Feed Table before attempting to operate the laminator.

© 200 6 General Binding Corporation

Page 21

Page 21
Image 21
GBC operation manual GBC 1264WF/1244WF Safety Shield, Feed Table