GBC 1264WF/1244WF | Operation Manual |
| |
In-Line Slitters
The In-Line Slitters allows the operator to slit the images as they pass through the Main Rollers and into the Pull Rollers. The trimmed waste can then be attached to the Rewinder Tubes and disposed of later.
To engage the In-Line Slitters, simply press the lever down to expose the blade. Keep hands and fingers away from the path of the In-Line Slitters. The blade is extremely sharp and can cut you.
To disengage the In-Line Slitter blade, simply push the blade lever up to return the blade to its original state.
Rear Cut-Off Blade
The Rear Cut-Off Blade is intended to cut the web output from the laminator and should not be used for any other purposes.
Stop the laminator before using the Rear Cut-Off Blade. Moving material can damage the Rear Cut-Off Blade.
Keep hands and fingers away from the path of the Rear Cut-Off Blade. The blade is very sharp and can cut you.
Slide the rear Cut-Off Blade about six inches into the web. Press and hold down the blade engage lever. Slide the Rear Cut-Off Blade from one side to the opposite side then release.
© 200 6 General Binding Corporation | Page 25 |
