1-6
Removing the printer from the shipping boxWarning: The printer weighs about 30 pounds (about 14 kilograms).Note: Save the packing materials inside the shipping box and put the box in a safe place;you will be able to repack the printer should you need to move it again.1. Take the printer out of the of the box and remove the packing material.
2. Take the printer out of the plastic bag.
3. Take the documentation and CD-ROM out of the plastic bag.
4. Check that you have all of the following:
GCCTECHNOLOGIESElite™12ppmConfiguration PagePrinter InformationInterfacesPaper HandlingLanguage: English
AppleTalk Name: Model
Page Count: 20
RAM Installed: 8MB
Hard disk: No disk
OS Version: 2.3
PostScript Level 2 Version: 2.3
ROM Version: 2.3
H/W Version: 1.0
AccuGray: Enabled
Print Darkness: Normal
Default Source: Upper Tray
Default Size: Letter
Jam Recovery: Disabled
Paper Reserve: Enabled
Manual Feed Timeoutt: 5 Minutes
8-pin Serial: LocalTalk
RS422 Serial (Inactive)
Baude Rate: 9600
Data Bits: 8
Stop Bits: 1
Parity: None
Flow Control: Xon/Xoff
RS232 Serial (Active)
Baude Rate: 9600
Data Bits: 8
Stop Bits: 1
Parity: None
Flow Control: Xon/Xoff
Parallel Port (Active)
PS/PCL Sensing: PostScript Only
Port Emulation
Parallel Port: Auto Switch
RS232 Port: Auto Switch
RS422 Port: Auto Switch
LocalTalk Port: PostScript Only
PostScript
Default Resolution: 800
Job Cancel: Enabled
Start Page: Disabled
Wait Timeout: 300 Seconds
PCLResolution: 600
Copies: 1
Font Source: Internal
Font Number: 1
Pitch: 10.0
Point Size: 12.0
Orientation: Portrait
Page Length: 60
Symbol Set: Roman-8
Wait Timeout: 120 Seconds
Line Wrap: Disabled
Line Termination: Normal
Emulations