• Memory is full.

Won’t respond to remote commands

You must use a touch-tone phone.

You must enter the correct security code.

Did unit hang up? If you take no action for a period of time, it automatically hangs up.

Answerer doesn’t work

Unplug the power cord from the electrical outlet and plug it back in to reset the answerer.

After the unit is plugged in, the screen displays FLASH ERROR.

Unplug the unit and plug it back in. If the message appears again, the unit needs service.

Can’t hear messages

• Adjust the volume control.

Greeting continues to play even after an extension phone is picked up.

This is normal operation. Auto disconnect is delayed for 1 second after the unit answers a call. If you are near the unit, press PLAY/STOP to stop the greeting.

No information is shown after the phone rings

Be sure to wait until the second ring before answering.

Check all cabling to make sure that all connections are secure and not damaged.

Did you order Caller ID service from your local telephone company?

Error message is displayed

The screen displays ERROR if the unit detects anything other than valid Caller ID information during the silent period after the first ring. This message indicates either the presence of noise on the line, or that an invalid message has been sent from the telephone company?

33

Page 33
Image 33
GE 00023598 manual