Telephone Set Up
You can customize the following settings to suit your needs. Local Area Code Sets your local area code for Dial Back. Display Contrast Selects the display contrast.
Time/Date | Sets the time and date. |
Message Length | Sets the length of time allowed for |
| incoming messages. |
Recording | Sets the recording quality between |
Quality | standard (STD) and long play (LONG). |
Rings to Answer | Selects the number of rings before |
| the unit answers. |
Default Settings
Local Area Code | – – – |
Display Contrast | 3 |
Time/Date | 12 a.m. 1/01 |
Message Length | 2 minutes |
Recording Quality | Standard (STD) |
Rings to Answer | 4 |
Security Code | 123 |
Dialing | Tone |
Remote Access Sets your
TONE/PULSE Sets the phone for tone or pulse dialing.
Dialing
Setting Your Local Area Code
1.Press and release the MENU button. The screen displays LOCAL AREA CODE. The unit announces, “Setup menu. Use SKIP or REPEAT to change setting, press MENU to save setting.”
2.The
3.Use the keypad to enter your three digit Local Area Code.
4.After the 3rd and last digit are entered, press the MENU button to store the area code and go to the next setting.
NOTE: If you make a mistake, you can use the SKIP or REPEAT button to move between 1st to 3rd digit and input the number from the keypad again.
NOTE: To skip to the next setting, press the MENU button. To exit setup, press the FLASH/EXIT button.
12
