Installation Instructions

Refrigerator

Models 20 and 22

Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: GEAppliances.com In Canada, call 1.800.361.3400 or Visit our Website at: geappliances.ca

BEFORE YOU BEGIN

Read these instructions completely and carefully.

IMPORTANT Save these

instructions for local inspector’s use.

IMPORTANT Observe all governing codes and ordinances.

Note to Installer – Be sure to leave these instructions with the Consumer.

Note to Consumer – Keep these instructions for future reference.

Skill level – Installation of this appliance requires basic mechanical skills.

Completion time – Refrigerator Installation 20 minutes

Water Line Installation

30minutes

Proper installation is the responsibility of the installer.

Product failure due to improper installation is not covered under the Warranty.

PREPARATION

MOVING THE REFRIGERATOR INDOORS

If the refrigerator will not fit through a doorway, the refrigerator door and freezer drawer or door (depending on model) can be removed.

To remove the refrigerator door, see Step 1 in the Reversing the Door Swing section.

To remove the freezer drawer, see the Removing the Freezer Drawer section.

To remove the freezer door, see Steps 2 and 3 in the Reversing the Door Swing section.

PREPARATION (cont.)

WATER SUPPLY TO THE ICEMAKER AND DISPENSER (ON SOME MODELS)

If the refrigerator has an icemaker, it will have to be connected to a cold water line. A GE water supply kit (containing tubing, shutoff valve, fittings and instructions) is available at extra cost from your dealer, by visiting our Website at GEAppliances.com (in Canada at geappliances.ca) or from Parts and Accessories, 800.626.2002 (In Canada 1.888.261.3055).

TOOLS YOU MAY NEED

 

 

 

3/8and 10 mm Socket

 

 

 

Adjustable Wrench

Drivers

 

 

 

 

 

 

 

 

 

 

 

 

1/4Outer Diameter

 

Compression Nut

Phillips Head Screwdriver

and Ferrule (sleeve)

 

(icemaker models only)

 

16

Page 16
Image 16
GE 197D4618P003 Before YOU Begin, Preparation, Tools YOU MAY Need, Read these instructions completely and carefully

197D4618P003 specifications

The GE 197D4618P003 is an advanced electrical component designed for various applications, commonly found within industrial power systems. This component demonstrates GE's commitment to providing reliability, efficiency, and technological innovation. With a robust design, the 197D4618P003 serves as a vital part in ensuring optimal performance in electrical circuits and systems.

One of the main features of the GE 197D4618P003 is its versatile compatibility with various GE equipment and systems. This ensures that it can effectively integrate into existing setups, minimizing the need for extensive modifications. Its design considers the rigorous demands of industrial environments, ensuring that it has a long operational life even when subjected to acute stress.

The 197D4618P003 incorporates cutting-edge technology to enhance reliability and operational efficiency. It features advanced materials that provide exceptional resistance to wear and tear, making it suitable for high-load applications. Enhanced thermal management is another hallmark of this component, allowing it to operate efficiently under diverse temperature conditions. This feature is crucial for maintaining system stability and prolonging equipment lifespan.

Furthermore, this component is equipped with sophisticated protection mechanisms, safeguarding it from electrical surges and other potential hazards. By maintaining a smooth operation and preventing unexpected failures, the 197D4618P003 contributes to overall system reliability. This feature is particularly beneficial in preventing downtime, ultimately leading to cost savings for businesses.

The GE 197D4618P003 also emphasizes energy efficiency. The design aligns with modern energy standards, contributing to reduced power consumption and lower operational costs. This is increasingly important in a world where energy efficiency is paramount for both environmental considerations and regulatory compliance.

In summary, the GE 197D4618P003 is an essential electrical component that embodies advanced technology, robust design, and user-friendly features. Its compatibility with existing systems, combined with superior durability and efficiency, makes it an indispensable element for industries relying on dependable power solutions. Whether deployed in manufacturing, energy production, or any industrial application, the 197D4618P003 will provide the reliability and performance needed to meet today’s demanding operational requirements.