Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

Instructions Operating Instructions

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the refrigerator away from the wall, be careful not to roll over or damage the power cord.

Installation

USE OF ADAPTER PLUGS (Adapter plugs not permitted in Canada)

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug.

Troubleshooting Tips

However, if you must use an adapter, where local codes permit, a temporary connection may be made to a properly grounded 2-prong wall outlet by use of a UL-listed adapter available at most local hardware stores.

The larger slot in the adapter must be aligned with the larger slot in the wall outlet to provide proper polarity in the connection of the power cord.

When disconnecting the power cord from the adapter, always hold the adapter in place with one hand while pulling the power cord plug with the other hand. If this is not done, the adapter ground terminal is very likely to break with repeated use.

If the adapter ground terminal breaks, DO NOT USE the refrigerator until a proper ground has been established.

Attaching the adapter ground terminal to a wall outlet cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall outlet is grounded through the house wiring. You should have the circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Consumer Support

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

4

Page 3 Page 5
Page 4
Image 4
GE 197D4618P003 operating instructions Troubleshooting Tips, Consumer Support
Page 3 Page 5

197D4618P003 specifications

The GE 197D4618P003 is an advanced electrical component designed for various applications, commonly found within industrial power systems. This component demonstrates GE's commitment to providing reliability, efficiency, and technological innovation. With a robust design, the 197D4618P003 serves as a vital part in ensuring optimal performance in electrical circuits and systems.

One of the main features of the GE 197D4618P003 is its versatile compatibility with various GE equipment and systems. This ensures that it can effectively integrate into existing setups, minimizing the need for extensive modifications. Its design considers the rigorous demands of industrial environments, ensuring that it has a long operational life even when subjected to acute stress.

The 197D4618P003 incorporates cutting-edge technology to enhance reliability and operational efficiency. It features advanced materials that provide exceptional resistance to wear and tear, making it suitable for high-load applications. Enhanced thermal management is another hallmark of this component, allowing it to operate efficiently under diverse temperature conditions. This feature is crucial for maintaining system stability and prolonging equipment lifespan.

Furthermore, this component is equipped with sophisticated protection mechanisms, safeguarding it from electrical surges and other potential hazards. By maintaining a smooth operation and preventing unexpected failures, the 197D4618P003 contributes to overall system reliability. This feature is particularly beneficial in preventing downtime, ultimately leading to cost savings for businesses.

The GE 197D4618P003 also emphasizes energy efficiency. The design aligns with modern energy standards, contributing to reduced power consumption and lower operational costs. This is increasingly important in a world where energy efficiency is paramount for both environmental considerations and regulatory compliance.

In summary, the GE 197D4618P003 is an essential electrical component that embodies advanced technology, robust design, and user-friendly features. Its compatibility with existing systems, combined with superior durability and efficiency, makes it an indispensable element for industries relying on dependable power solutions. Whether deployed in manufacturing, energy production, or any industrial application, the 197D4618P003 will provide the reliability and performance needed to meet today’s demanding operational requirements.
Top Page Image Contents