Installation Instructions

INSTALLING THE REFRIGERATOR (cont.)

1CONNECTING THE REFRIGERATOR TO THE HOUSE WATER LINE (cont.)

AIf you are using copper tubing, place a compression nut and ferrule (sleeve) onto the end of the tubing coming from the house cold water supply.

If you are using the GE SmartConnecttubing, the nuts are already assembled to the tubing.

BIf you are using copper tubing, insert the end of the tubing into the refrigerator connection, at the back of the refrigerator, as far as possible. While holding the tubing, tighten the fitting.

If you are using GE SmartConnecttubing, insert the molded end of the tubing into the refrigerator connection, at the back of the refrigerator, and tighten the compression nut until it is hand tight. Then tighten one additional turn with a wrench. Overtightening may cause leaks.

CFasten the tubing into the clamp provided to hold it in position. You may need to pry open the clamp.

One of the illustrations below will look like the connection on your refrigerator.

Icemaker-Ready models

 

1/4

Tubing

Copper

Clamp

Tubing

 

 

 

1/4

 

 

Compression

 

 

Nut

 

 

Ferrule

 

 

(sleeve)

SmartConnect

 

Refrigerator

Tubing

 

 

Connection

 

 

Icemaker-Installed Models

 

Refrigerator

Ferrule

 

(sleeve)

 

Connection

1/4Tubing

 

SmartConnect

 

 

Tubing

 

 

1/4

 

 

Compression

 

 

Nut

 

 

 

Tubing Clamp

 

18

2TURN ON THE WATER SUPPLY

(icemaker and dispenser models)

Turn the water on at the shutoff valve (house water supply) and check for any leaks.

3PLUG IN THE REFRIGERATOR

On models with an icemaker, before plugging in the refrigerator, make sure the icemaker power switch is set to the O (off) position.

See the grounding information attached to the power cord.

4PUT THE REFRIGERATOR IN PLACE

Move the refrigerator to its final location.

Page 18
Image 18
GE 197D4618P003 operating instructions Turn on the Water Supply, Plug in the Refrigerator, PUT the Refrigerator in Place

197D4618P003 specifications

The GE 197D4618P003 is an advanced electrical component designed for various applications, commonly found within industrial power systems. This component demonstrates GE's commitment to providing reliability, efficiency, and technological innovation. With a robust design, the 197D4618P003 serves as a vital part in ensuring optimal performance in electrical circuits and systems.

One of the main features of the GE 197D4618P003 is its versatile compatibility with various GE equipment and systems. This ensures that it can effectively integrate into existing setups, minimizing the need for extensive modifications. Its design considers the rigorous demands of industrial environments, ensuring that it has a long operational life even when subjected to acute stress.

The 197D4618P003 incorporates cutting-edge technology to enhance reliability and operational efficiency. It features advanced materials that provide exceptional resistance to wear and tear, making it suitable for high-load applications. Enhanced thermal management is another hallmark of this component, allowing it to operate efficiently under diverse temperature conditions. This feature is crucial for maintaining system stability and prolonging equipment lifespan.

Furthermore, this component is equipped with sophisticated protection mechanisms, safeguarding it from electrical surges and other potential hazards. By maintaining a smooth operation and preventing unexpected failures, the 197D4618P003 contributes to overall system reliability. This feature is particularly beneficial in preventing downtime, ultimately leading to cost savings for businesses.

The GE 197D4618P003 also emphasizes energy efficiency. The design aligns with modern energy standards, contributing to reduced power consumption and lower operational costs. This is increasingly important in a world where energy efficiency is paramount for both environmental considerations and regulatory compliance.

In summary, the GE 197D4618P003 is an essential electrical component that embodies advanced technology, robust design, and user-friendly features. Its compatibility with existing systems, combined with superior durability and efficiency, makes it an indispensable element for industries relying on dependable power solutions. Whether deployed in manufacturing, energy production, or any industrial application, the 197D4618P003 will provide the reliability and performance needed to meet today’s demanding operational requirements.