GE 197D4618P003 Set The Controls, Remove Packaging Start Icemaker, icemaker models

Installation Instructions

8

SET THE CONTROLS

Set the controls to the recommended setting.

9REMOVE PACKAGING START ICEMAKER

(icemaker models)

A)Remove all tape, foam and protective packing from shelves and drawers.

B)Remove the tie downs from the freezer baskets.

C)Place half width basket onto drawer slides. See About the freezer section for instructions.

Set the icemaker power switch to the I (on) position. The icemaker will not begin to operate until it reaches its operating temperature of 15°F (–9°C) or below. It will then begin operation automatically. It will take 2–3 days to fill the ice bin.

Power switch

NOTE:

In lower water pressure conditions, the water valve may turn on up to 3 times to deliver enough water to the icemaker.

21