Installation Instructions
INSTALLING THE REFRIGERATOR (cont.)
6ATTACH FREEZER DOOR HANDLE
ALook for an arrow label on the front of the handle. Hold the handle so that the arrow is pointing to the left.
BAlign keyhole slots on the right and left sides of the back of the handle with the screws mounted on the front of the door/drawer. Press the handle against the door/drawer front, making sure that the screws go into the keyhole slots.
CHolding the handle with both hands, press it firmly against the front of the door and slide the handle to the left.
Screws mounted on door
7LEVEL THE REFRIGERATOR
The leveling legs have 3 purposes:
1)Leveling legs adjust so the door closes easily when opened about halfway.
(Front of the refrigerator should be 1/4″ [6 mm] higher than the rear of the refrigerator).
2)Leveling legs adjust so the refrigerator is firmly positioned on the floor and does not wobble.
3)Leveling legs serve as a stabilizing brake to hold the refrigerator securely in position during operation and cleaning.
ATurn the leveling legs clockwise to raise the refrigerator, counterclockwise to lower it.
CAUTION: To avoid possible personal injury or property damage, the leveling feet must be firmly touching the floor.
BInstall the base grille by aligning the prongs on the back of the grille with the holes in the cabinet. Push forward until the grille snaps into place.
Keyhole slots on back of handle
20
