GE 200D8074P044 5LEVEL THE REFRIGERATOR, 6LEVEL THE DOORS, 7SCREW DOWN SUPPORT LEG, To align

Installation Instructions

4PUT THE REFRIGERATOR IN PLACE

Move the refrigerator to its final location.

5LEVEL THE REFRIGERATOR

The refrigerator can be leveled by adjusting the rollers located near the bottom hinges.

Rollers

Raise

Rollers have three purposes:

•Rollers adjust so the door closes easily when opened about halfway. (Raise the front about 5/8” [16 mm] from the floor.)

•Rollers adjust so the refrigerator is firmly positioned on the floor and does not wobble.

•Rollers allow you to move the refrigerator away from the wall for cleaning.

To adjust the rollers:

•Turn the roller adjusting screws

clockwise to raise

the refrigerator,

counterclockwise to lower it. Use a 3/8” hex socket or wrench, or an adjustable wrench.

Roller adjusting screw

6LEVEL THE DOORS

Adjust the refrigerator door to make the doors even at the top.

To align:

AUsing a 7/16” wrench, turn the door adjusting screw to the right to raise the door, to the left to lower it.

NOTE:

A nylon plug, imbedded in the threads of the pin, prevents the pin from turning unless a wrench is used.

BAfter one or two turns of the wrench, open and close the refrigerator door and check the alignment at the top of the doors.

Doors should be even at top

Raise

7/16” wrench

7SCREW DOWN SUPPORT LEG

Screw down the support leg until it touches the floor. This will prevent door misalignment.

23