GE 200D8074P044 Consumer Support, QuickSpace Shelf on some models, Freezer Baskets on some models

Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

About the shelves and bins.

Not all features are on all models.

QuickSpace™ Shelf (on some models)

This shelf splits in half and slides under itself for	On some models, this shelf can not be used in
storage of tall items on the shelf below.	the lowest position.
This shelf can be removed and replaced
or relocated just like Slide-Out Spillproof
Shelves.

Freezer Baskets (on some models)

To remove, slide out to the stop position,	Make sure you push the baskets all the way back
lift the front past the stop position, and	in before you close the door.
slide out.

Freezer Baskets (on some models)

To remove, push the basket all the way to the	Make sure you push the baskets all the way back
back of the freezer. Lift up until the back pins	in before you close the door.
are disengaged. Lift the entire basket up and
pull out.

Slide-Out Freezer Shelves

To remove, slide out to the stop position,	Make sure you push the shelves all the way back
lift the front past the stop position, and slide out	in before you close the door.
from rib.

Fixed Freezer Shelves

To remove, lift the shelf up at the left side and	NOTE FOR DISPENSER MODELS: In order
then bring the shelf out.	to take full advantage of the tilt-out ice bin (on
	some models), only store items on the shelf
	below the ice bin that are no taller than the
	lowest point on the bin.

Door Wine/Beverage Rack (on some models)

Consumer Support

This rack holds up to 5 cans, one bottle of wine or one 2-liter bottle of soda.

The rack hangs from the sides of the dairy bin.

To remove:

Empty the wine/beverage rack.

Holding the bottom of the dairy bin, lift the front straight up, then lift up and out.

To detach the rack from the dairy bin, pull the rack’s side wires out of the holes on each side of the dairy bin.

To replace:

Reattach the rack to the sides of the bin.

Engage the back side of the bin in the molded supports on the door.

Then push down on the front of the bin. The bin will lock into place.

8