GE 206C1559P195 Installation Preparation - Enclosure, Prepare Dishwasher Enclosure

Installation Preparation – Enclosure

PREPARE DISHWASHER ENCLOSURE

WARNING	To reduce the risk of shock, fire, or injury
	to persons, the installer must ensure that
	the dishwasher is completely enclosed at
	the time of installation.

•The dishwasher must be installed no more than

10 feet from sink for proper drainage.

•The dishwasher must be fully enclosed on the top, sides and back.

•The dishwasher must not support any part of the enclosure.

ADVERTENCIA Para reducir el riesgo de choque, incendio o lesión a personas, el instalador se debe cerciorar de que la lavadora esté completamente cerrada en el momento de la instalación.

Countertop

Dishwasher

Clearances:

In a corner installation, provide at least 2" clearance between the dishwasher and the adjacent cabinet, wall or other appliance.

Provide at least 27" of clearance in front of the dishwasher.

•The rough cabinet opening must have a minimum width and depth of 24" and height of 34-1/2" ± 1/4" from the floor to the underside of the countertop.

•The back wall should be free of pipes or wires.

•Adjacent cabinets should be square and plumb to ensure a good fit. Refer to Figure A.

•For a corner installation, allow 2" minimum clearance between the dishwasher and the adjacent wall.

•Provide at least 27" in front of the dishwasher to allow the dishwasher door to open fully. Refer to Figure B.

Figure A

•Make sure the floor is level inside the opening and even with the finished floor of the kitchen. This will facilitate removal of the dishwasher at a later date for service, if needed.

27" Minimum

2" Minimum

Figure B

3