GE 25982 manual Cordless Handset Speakerphone Operation, Storing a Name and Number in Memory

Switching Between Speakerphone and Handset

You can switch between speakerphone and handset after dialing a number, or any time during a conversation.

Speaker to Cordless/Corded Handset — Press TALK/CALL BACK or SPEAKER on handset, and then press speaker/call back on the base. Or lift the corded handset when using speaker phone. Speak into the cordless/corded handset.

Corded/Cordless Handset to Speaker — Press speaker/call back, then hang up the handset. Speak into the Speakerphone.

Cordless Handset Speakerphone Operation

Switching Between the Speakerphone and Handset Earpiece

•If you are using the cordless handset earpiece and want to switch to the handset speakerphone, press the SPEAKER button; you can then press SPEAKER button again to end conversation.

•If you are using the cordless handset speakerphone and want to switch to the cordless handset earpiece, press the TALK/CALL BACK button, you can then press the TALK/CALL BACK button again to end conversation.

Conference the External Caller with Cordless Handset and Base

The handset or the base can enter conference directly by pressing TALK/CALL BACK or SPEAKER button on the handset or speaker/call back button on the base while the other party (handset or base) is on the external line.

Memory

The cordless handset and base each have their own separate memory storage areas. Store ten 15-character names and 24-digit telephone numbers in the handset and base memories.

Storing a Name and Number in Memory

1.Press the memory/conf button on base or mem/conference button on handset.

2.Press the desired memory location button (0 through 9 number keys) or use the caller id (9 or :) button on the base or the CALLER ID-VOLUME(6 or 5) button on the handset to scroll to the desired location. If the memory location is occupied, the stored name and number displays. If the memory location is unoccupied, EMPTY shows in the display.

28