GE 25982 manual Tone/Pulse Dialing, Transfer ON/OFF, Registration Link Cordless Handset

Tone/Pulse Dialing

NOTE: This setting may be made only with the base.

1.Press the menu/flash button until 41TONE 2PULSE shows in the display. 1TONE is the default.

2.Press the caller id (9or :) button or the touch-tone pad to scroll to 1TONE or 2PULSE.

3.Press mute/menu to save. You will hear a confirmation tone.

Transfer ON/OFF

NOTE: This setting may only be made with the handset.

In order to use the call Transfer feature (applicable ONLY with additional handsets), you must have the Transfer ON/OFF set to ON through the menu of each handset.

1.Press the mute/menu button until TRANSFER 4 1OFF shows in the display.

2.Use the CALLER ID-VOLUME(6 or 5) button or the touch-tone pad on the handset to scroll to 2ON.

3.Press mute/menu again to save. You will hear a confirmation tone.

Registration (Link Cordless Handset)

NOTE: If a handset become de-registered or inoperative, it may be necessary to register the cordless handset(s) again.

Registration links the base to a cordless handset. Once a handset is registered it can use the base’s phone connection. A cordless handset will not operate until it is registered to the base. During the registration process, keep the handset near the base.

1.Press the menu/flash button on the base until LINK HANDSET ? shows in the display. 2 NO is the default setting.

2.Press the 1 number key or press the caller id (9 or :) button on the base to scroll to 1YES.

3.Press menu/flash on the base to confirm handset is linked to the base. WAITING HANDSET REGISTRATION shows in the display.

4.Press the mute/menu button on the handset until LINK BASE? shows in the display. NO is the default setting.

5.Press CALLER ID-VOLUME(6 or 5) button on the handset to scroll to YES.

6.Press mute/menu on the handset again to confirm. You will hear a long confirmation tone when the handset is successfully linked to the base.

20