GE 26936 manual

5.Remove the wall mount bracket. Rotate it so that the bottom of the phone is flat. Reattach the

wall mount bracket by inserting	7
the tabs into the slots on the top
of the unit first, and then	6
snapping the bottom tabs into
place.
6. Plug the telephone line cord into
the jack marked TEL LINE on the
back of the unit and plug the	5
other end into a modular wall
jack. Then stuff the excess line
cord into the wall mount
bracket.

7.Slip the mounting holes over the wall plate posts and slide the unit down firmly into place. (Wall plate not included.)

8. Remove the handset hook; turn	8	9
it upside down, and put it back
in the slot. You need to do this
so the handset doesn’t fall out
of the base.

9. Raise the base antenna.

		M1
		M2
FORMAT VOICE	HOLD	PROGRAM
MAIL		M3

MEMORY

DIAL REVIEW DEL

1 ABC2 DEF3

NOTE : The phone automatically defaults to touch-tone dialing. To change to pulse (rotary) dialing, see “Tone/Pulse Dialing”. If you don’t know which type of service you have, check with the phone company.

GHI4 JKL5 MNO6

CHARGE8 9

PQRS7 TUVWXYZ

IN USE

TONE* OPER0 #

MUTE FLASH RE/PA HOLD

PAGE

INTERCOM

SPEAKER

8