4.Press SELECT/TRANSFER to confirm the selection. ENTER LOCATION shows in the display.
5.Use the
6.Press the SELECT/TRANSFER button to confirm.The number dials automatically.
- OR -
1.Make sure the phone is OFF (not in talk mode).
2.Press the MENU button to enter the main menu.
3.Use the CID/VOL (+ or
4.Press the SELECT/TRANSFER button to access the phone book.
5.Use the CID/VOL (+ or
6.Press theTALK/call back or SPEAKER buttons.The number dials automatically.
CHAIN DIALING FROM MEMORY
This unit allows you to perform cascade dialing with several numbers stored in the memory. For example; to perform a long distance phone call, store the long distance call access number, authorization code, and the desired telephone number in memory locations 7, 8 and 9 respectively.
1.Make sure the phone is ON (in talk mode) by pressing theTALK/call back or SPEAKER button.
2.Press the MENU button to access the option menu.
3.Repeat steps 1 through 4 in Dialing a Number from Memory, and then press the first memory location, i.e. 07.
4.Press SELECT/TRANSFER button to confirm.
5.When you hear the access tone, repeat steps 1 through 4 in Dialing a Number from Memory, and then press the second memory location, i.e. 08.
6.Press SELECT/TRANSFER button to confirm.
7.At the next access tone, repeat steps 1 through 4 in Dialing a Number from Memory, and then press the third memory location, i.e. 09.
8.Press SELECT/TRANSFER button to confirm.
INSERTING A PAUSE IN THE DIALING SEQUENCE
Press the PAUSE# button once to insert a delay in the dialing sequence of a stored telephone number. A pause is needed to wait for a dial tone (for example after you dial 9 for an outside line, or to wait for a computer access tone). PAUSE shows on the display as a P . Each pause counts as 1 digit in the dialing sequence. If you need a longer pause, press the PAUSE# button twice.
CONNECTING THE BELT CLIP
To attach the belt clip, insert the sides of the belt clip into the slots on each side of the handset. Snap into place.
26
