2.When finished, press the TALK/END button on handset or the speaker button on base, or put the handset back into the base cradle to hang up.
NOTE: If you have turned the Auto Talk function on, you can pick up the handset from the base to answer the incoming call directly, without pressing any buttons.
NOTE: Adjust the handset volume by pressing the CID/VOL (
+or - ) button during a call.
NOTE: If you press the speaker button to answer a call while the handset is not in the base cradle, the call will not be ended even when you place the handset back into the base cradle during the conversation.
Inserting a Pause in the Dialing Sequence
Press the #pause button twice to insert a delay in dialing sequence when a pause is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or to wait for a computer access tone.) Pause shows in the display as a P, and each pause counts as one digit in the dialing sequence.
Redial
To quickly redial a number you dialed:
1.Make sure the phone is OFF (not in talk mode).
2.Press the TALK/END button.
3.Press the REDIAL button first, then use the CID/VOL ( + or - ) button to select the desired redial number.
NOTE: You may choose from 10 last dialed numbers.
4.Press the Talk/End button and the number will dial automatically.
1. Make sure the phone is OFF (not in talk mode).
27
