GE 27951, 27950 manual Changing the Battery, Memory Full, Leaving a Memo

Memory Full

When answering system memory is full, the system answers after 10 rings, announces “Memory full” and waits for you to enter

3-digit security code. If you don’t enter the security code within 7 seconds, the phone hangs up.

You should erase some messages so the answering system can record new messages.

NOTE: The unit also answers after the 10th ring if it is turned off. To access the answering system, enter your 3- digit security code.

Leaving a Memo

This feature lets you record a memo up to 2 minutes long to store as an incoming message.

1.Press and hold the memo button

2.Begin speaking after it announces “Record message”.

3.Release the memo button when finished.

Changing the Battery

CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Nickel- metal Hydride (Ni-MH) battery model 5-2734, that is compatible with this unit.

1.Make sure the telephone is OFF (not in TALK mode) before you replace battery.

2.Remove the battery compartment door.

3.Disconnect the battery plug from the jack inside the battery compartment and remove the battery pack from the handset.

4.Insert the new battery pack and connect the cord to the jack inside the battery compartment.

44