Step 2 - When the Control Center receives the Signal Repeater’s test signal, it will flash the green power indicator. This means a confirmation signal was sent back to the Signal Repeater. Release all buttons.
Step 3 - When the Signal Repeater receives the confirmation signal, the LED indicator will flash, five times. If the Signal Repeater does not receive the confirmation signal from the Control
Center, the LED indicator on the Signal Repeater will not flash. You will need to move the Signal Repeater closer to the Control Center and retest.
Step 4 - To Ensure the Signal Repeater can receive the signal from the Sensor, activate the Sensor. The Signal Repeater’s LED indicator should flash rapidly, and the Control Center should respond to the Sensor’s signal.
This process will help you locate the Signal Repeater to the best (farthest) position from the Control Center in order to extend the range of the Sensor.
15
