|
|
|
| Cook and Hold |
+ |
|
|
| Your new control has a cook and hold feature that keeps cooked |
| ||||
|
|
|
| foods warm for up to 3 hours after the cooking function is finished. |
To activate this feature, follow the steps below.
| Press the BAKE and BROIL HI/LO pads at the same |
1 | |
| time for 2 seconds until the display shows “SF.” |
| Press the COOKING TIME pad. The display will |
2 | |
1 | show “Hld OFF.” |
Press the COOKING TIME pad again to activate the | |
| feature. The display will show “Hld ON.” |
| Press the START pad to activate the cook and hold |
3 | |
| feature and leave the control set in this special |
features mode.
Safety Information Operating Instructions Installation
+
or
Changing the Speed of the + or – Pads
As you use the + or – pads when setting a time or temperature, you may notice the display changes slowly. This special feature allows you to change the speed.
To set the speed you prefer, follow the steps below.
| Press the BAKE and BROIL HI/LO pads at the same |
1 | |
| time for 2 seconds until the display shows “SF.” |
| Press the + pad. The display will show you a set |
2 | |
| speed between 1 and 5. |
| Press the + pad to increase the speed up to the |
3 | |
| number 5. |
| Press the – pad to decrease the speed down to |
| the number 1. |
| Press the START pad to activate the setting and leave |
4 | |
| the control set in this special features mode. |
Instructions Troubleshooting Tips GECustomer Service
21