GE 49-8827, 164D3333P069 owner manual How to Set the Oven for Cleaning, Using the self-cleaningoven

Customer Service Troubleshooting Tips Installation Instructions Operating Instructions Safety Information

Using the self-cleaning oven.

Never force the latch handle. Forcing the handle will damage the door lock mechanism.

How to Set the Oven for Cleaning

	Latch the door.
1
	Press the SELF CLEAN pad.
2
	Using the + or – pad, enter the desired clean time.
3

Clean cycle time is normally 4 hours, 20 minutes. You can change the clean time to between 3 hours and 5 hours, depending on how dirty your oven is.

or	The self-clean cycle will automatically begin after CLEAN
	is displayed and the time for the clean cycle is set. The
	words ON and LOCKED DOOR will appear in the display.
	It will not be possible to open the oven door until the
	temperature drops below the lock temperature and the
	LOCKED DOOR light goes off.
	When the LOCKED DOOR light is off, slide the latch
	handle to the left as far as it will go and open the door.

■The words LOCK DOOR will flash and the oven control will signal if you set the clean cycle and forget to close the oven door.

■To stop a clean cycle, press the CLEAR/OFF pad. When the LOCKED DOOR light goes off and the oven has cooled below the locking temperature, open the door.

30