Customer Service Troubleshooting Tips Installation Instructions Operating Instructions Safety Information

IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

WARNING ANTI-TIP DEVICE

All ranges can tip and injury could result.

To prevent accidental tipping of the range, attach it to the wall and floor by installing the Anti-Tip device supplied.

To check if the device is installed and engaged properly, remove the storage drawer and inspect the rear leveling leg. Make sure it fits securely into the slot.

If you pull the range out from the wall for any reason, make sure the device is properly engaged when you push the range back against the wall. If it is not, there is a possible risk of the range tipping over and causing injury if you or a child stand, sit or lean on an open door.

Please refer to the Anti-Tip device information in this manual. Failure to take this precaution could result in tipping of the range and injury.

 

 

IMPORTANT SAFETY NOTICE

 

 

The California Safe Drinking Water and Toxic Enforcement

 

 

Act requires the Governor of California to publish a list of

 

 

 

 

substances known to the state to cause birth defects or

 

 

other reproductive harm, and requires businesses to warn

 

 

customers of potential exposure to such substances.

 

 

The fiberglass insulation in self-clean ovens gives off a very

 

 

small amount of carbon monoxide during the cleaning cycle.

 

 

Exposure can be minimized by venting with an open window

 

 

or using a ventilation fan or hood.

 

 

Fluorescent light bulbs contain mercury. If your model has a

4

 

surface light, you must recycle the fluorescent light bulb

 

according to local, state and federal codes.

Page 4
Image 4
GE 49-8827, 164D3333P069 All ranges can tip and injury could result, California Safe Drinking Water and Toxic Enforcement

164D3333P069, 49-8827 specifications

The GE 49-8827,164D3333P069 is a standout model in GE’s expansive portfolio, combining advanced engineering with innovative technology to deliver outstanding performance across a variety of applications. Designed primarily for industrial and commercial settings, this unit exemplifies GE's commitment to reliability and efficiency.

One of the main features of the GE 49-8827 is its robust construction. Built to withstand harsh environments, its housing is made from high-grade materials that resist corrosion, wear, and tear. This durability ensures a long service life, reducing maintenance costs and downtime for users. The design also incorporates effective thermal management systems, facilitating optimal operation under a variety of temperature conditions.

In terms of technology, the GE 49-8827 integrates state-of-the-art digital controls. These advanced controls enable users to fine-tune settings to meet specific operational needs. The intuitive interface provides real-time diagnostics and monitoring, allowing for quick identification of any issues that may arise. This feature enhances operational efficiency and maximizes productivity in demanding work environments.

Another crucial characteristic of the GE 49-8827 is its energy efficiency. The model is designed to operate with minimal energy consumption, meeting stringent energy standards while providing powerful output. This focus on energy efficiency not only reduces operational costs but also aligns with growing demands for sustainable practices in industrial sectors.

Moreover, the GE 49-8827 includes innovative noise reduction technologies. This feature significantly lowers operational noise, creating a more comfortable working environment. It is particularly beneficial in settings where noise pollution may pose a risk, such as in hospitals or educational institutions.

Performance-wise, the GE 49-8827 stands out with its high output capabilities while maintaining a compact footprint. This versatility makes it suitable for a wide range of applications, from manufacturing to commercial facilities. Additionally, the model supports multiple operational modes, allowing users to select the most effective mode for their specific requirements.

In conclusion, the GE 49-8827,164D3333P069 represents a blend of durability, efficiency, and advanced technology that makes it an excellent choice for businesses looking to optimize their operations. Its robust features not only enhance performance but also provide a sustainable approach to industrial needs.