GE 164D3333P171, 49-8941 To remove a surface unit, flat on the drip pan when you plug it back in

Be sure all the controls are turned to OFF and the surface units are cool before attempting to remove them.

Surface unit		Surface Units (electric coil models only)
		To clean the surface units, turn the control to the highest
		setting for a minute. The coils will burn off any soil.
		To remove a surface unit:
		To remove the drip pans for cleaning, the surface units
	Drip pan	must be removed first.
Receptacle
		Lift the surface unit about 1 inch above the drip pan and
		pull it out.
		Do not lift the surface unit more than 1 inch. If you do, it may not lie
		flat on the drip pan when you plug it back in.
		Repeated lifting of the surface unit more than 1 inch above
		the drip pan can permanently damage the receptacle.
		To replace a surface unit:
		Replace the drip pan into the recess in the cooktop. Make
		sure the opening in the pan lines up with the receptacle.
		Insert the terminals of the surface unit through the
		opening in the drip pan and into the receptacle.
		Guide the surface unit into place so it rests evenly.
		Do not immerse the surface units in liquids of any kind.
		Do not clean the surface units in a dishwasher.
		Do not bend the surface unit plug terminals.
		Do not attempt to clean, adjust or in any way repair the plug-in
		receptacle.

Drip Pans (electric coil models only)

Remove the surface units. Then lift out the drip pans.

For best results, clean the drip pans by hand. Place them in a covered container (or a plastic bag) with 1/4 cup ammonia to loosen the soil. Then scrub with a soap-filled scouring pad if necessary. Rinse with clean water and polish with a clean soft cloth.

The drip pans may also be cleaned in the dishwasher.
Clean the area under the drip pans often. Built-up soil, especially
grease, may catch fire.
Do not cover the drip pans with foil. Using foil so close to the receptacle could
cause shock, fire or damage to the range.	37

Safety Information Operating Instructions Installation Instructions Troubleshooting Tips Customer Service