GE 49-8941 Instructions Safety Information, Dual Surface Unit Switch glass cooktops only, Service

Instructions Safety Information

Using the surface units.

Indicator Lights (glass cooktops only)

A HOT COOKTOP indicator light will glow when any radiant element is turned on, and will remain on until the surface is cool enough to touch.

A surface unit ON indicator light will glow when any surface unit is on.

NOTE: The surface unit ON indicator light may glow between the surface control settings of LO and OFF, but there is no power to the surface units.

Troubleshooting Tips Installation Instructions Operating

SURFACE

COOKING

Never cook directly on the glass. Always use cookware.

OFF CENTER

Always place the pan in the center of the surface unit you are cooking on.

About the radiant surface units… (glass cooktops only)

The radiant cooktop features heating units beneath a smooth glass surface.

NOTE: A slight odor is normal when a new cooktop is used for the first time. It is caused by the heating of new parts and insulating materials and will disappear in a short time.

The surface unit will cycle on and off to maintain your selected control setting.

It is safe to place hot cookware from the oven or surface on the glass surface when the surface is cool.

Even after the surface units are turned off, the glass cooktop retains enough heat to continue cooking. To avoid over-cooking, remove pans from the surface units when the food is cooked. Avoid placing anything on the surface unit until it has cooled completely.

■Water stains (mineral deposits) are removable using the cleaning cream or full strength white vinegar.

■Use of window cleaner may leave an iridescent film on the cooktop. The cleaning cream will remove this discoloration.

■Don’t store heavy items above the cooktop. If they drop onto the cooktop, they can cause damage.

■Do not use the surface as a cutting board.

Dual Surface Unit Switch (glass cooktops only)

Service

9" 6"

The right front surface unit has 2 cooking sizes to select from so you can match the size of the unit to the size of the cookware you are using.

Customer

To use the small (6 inch) surface unit, push in the SMALL BURNER portion of the switch next to the control knob.

To use the large (9 inch) surface unit, push in the

14

LARGE BURNER portion of the switch.