Consumer Support, Prepare the Window and the Case

Instructions

Window installation instructions.

Safety

Remove the Air Conditioner From the Case

3	A	Remove the 2 shipping screws from the back
3	A	of the case.
	B	Remove the 2 screws on each side of the case.
		Keep these for later use.

Slide the air conditioner from the case by gripping the base pan handle and pulling forward while bracing the case.

Shipping screws

Troubleshooting Tips Installation Instructions Operating Instructions

Prepare the Window and the Case

4	A	Cut the window sash seal to the proper length.
		Peel off the backing and attach the seal to the

underside of the window sash.

BCarefully insert the plastic frame guides into the bottom of the case on each side.

Remove the backing from the top mounting rail seal strip and attach the seal to the bottom of the top mounting rail.

Install the top mounting rail with 3 type A screws on the inside of the case. Insert the frames for the accordion panels into the top mounting rail and the frame guides. Attach the accordion panels to the side of the case using 4 type A screws on each side.