GE AGE12 Preparing to install the air conditioner, Safety Instructions Operating Instructions

Preparing to install the air conditioner.

Read these instructions completely and carefully.

Before You Begin

NOTE TO INSTALLER: Leave these instructions with	CAUTION:
the air conditioner after installation is completed.
NOTE TO CONSUMER: Keep this Owner’s Manual	Do not, under any circumstances, cut or remove
	the third (ground) prong from the power cord.
and Installation Instructions for future use.
	Do not change the plug on the power cord of this
IMPORTANT NOTES:
	air conditioner.

For personal safety, this air conditioner must be

properly grounded.Aluminum house wiring may present special problems—consult a qualified electrician.

It is important to have the wall outlet and circuit checked by a qualified electrician if there is any doubt as to whether a proper ground exists.

Follow National Electric Codes (NEC) and/or local codes and ordinances.

Electrical Requirements

Safety Instructions Operating Instructions

Some models require 115/120-volt a.c., 60 Hz grounded outlet protected with a 15-amp time delay fuse or circuit breaker.

The 3-prong grounding plug minimizes the possibility of electric shock hazard. If the wall outlet you plan to use is only a 2-prong outlet, it is your responsibility to have it replaced with a properly grounded 3-prong wall outlet.

Some models require 230/208-volt a.c., protected with a time delay fuse or circuit breaker. These models should be installed on their own single branch circuit for best performance and to prevent overloading house or apartment wiring circuits, which could cause a possible fire hazard from overheating wires.

Installation Instructions

Tools You Will Need

■ Phillips-head screwdriver	■ Scissors or knife
■ Flat-blade screwdriver	■ Pencil
■ Ruler or tape measure	■ Level

7

Troubleshooting Tips Consumer Support