GE ASH10 1WINDOW REQUIREMENTS, 2STORM WINDOW REQUIREMENTS, 3REMOVE THE FRONT GRILLE IF ATTACHED

Window Installation Instructions

1WINDOW REQUIREMENTS

•These instructions are for a standard double-hung window. You will need to modify them for other types of windows.

•The air conditioner can be installed without the accordion panels if needed to fit in a narrow window. See the window opening dimensions below.

•All supporting parts must be secured to firm wood, masonry or metal.

•The electrical outlet must be within reach of the power cord.

8,000 BTU models

14″ min.

25″ to 36″

(With accordion panels)

20″ min.

(Without accordion panels)

10,000 and 12,000 BTU models

151⁄4″ min.

26″ to 391⁄2″

(With accordion panels)

221⁄4″ min.

(Without accordion panels)

2STORM WINDOW REQUIREMENTS

A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly.

To adjust for this, attach a piece of wood to the stool.

WOOD PIECES–

WIDTH: 2″

LENGTH: Long enough to fit inside the window frame.

THICKNESS: To determine the thickness, place a piece of wood on the stool to make it 1/2″ higher than the top of the storm window frame.

Attach securely with nails or screws provided by the installer.

Wood

1/2″ higher
than frame	Stool

Storm window frame

3REMOVE THE FRONT GRILLE (IF ATTACHED)

ARemove shipping tape, if present. On models with a slide-out air filter, remove it (see the Care and Cleaning section) and the screw behind it (if present) that holds the grille in place.

OR

On models with a raise-up inlet grille, lift it (see the Care and Cleaning section) and remove the screw behind it (if present)

that holds the grille in place.

On some models,
open the inlet
grille from the
sides and remove	OR
it. Remove the
screws from the

bottom or lower right corner, if present.

11