Window Installation Instructions

8

INSTALL THE AIR CONDITIONER IN THE CASE

A

Slide the air conditioner into the case. Reinstall the 2 screws removed earlier on each side of the case.

B

Place the bottom inner case gasket between the bottom of the air conditioner and the inside bottom of the case. Fold up the ends on both sides and push them in.

C

Front of air

 

Bottom inner

conditioner

 

case gasket

 

 

 

 

 

 

Attach the front grille to the case by inserting the tabs on the grille into the slots on the front of the case. Push the grille in until it snaps into place.

Guide the lever carefully through the grille as you push it in.

D

Secure the front grille to the case by replacing the screw removed in Step 3. If a screw was not removed in Step 3, secure the grille with a type A screw for models with a raise-up inlet grille or a type D screw for models with a slide-out filter.

The installation is now complete.

14

Page 14
Image 14
GE ASH12, ASH10 installation instructions Install the AIR Conditioner in the Case