GE ASQ28 owner manual 7INSTALL THE CASE IN THE WINDOW cont, Window Installation Instructions

Window Installation Instructions

7INSTALL THE CASE IN THE WINDOW

ACarefully slide the case into the window and center the case. Lower the window behind the top mounting rail. Pull the bottom of the case forward so that the bottom mounting rail is tight against the back of the window sill. Mount the case to the window sill using 6 type B screws. Drill pilot holes, if necessary.

6 type B screws

Sill

BThread a type C bolt about 1/2 of the way into the outer face of the shortest angle of each V-support.

Type C bolt

C Position the V-supports on the case

bottom so that they will be near the

outside wall. Attach a V-support to each

7INSTALL THE CASE

IN THE WINDOW (cont.)

DUse a wood block (obtained locally) between the leveling bolts and the wall if the wall is weak or if the weight of the air conditioner falls between the studs in the wall.

EAdjust the leveling bolts against the outside wall so that the case has a slight tilt to the outside. Tighten nuts with an adjustable wrench. Use a level; no more than a 1/2 bubble will be the correct case slant to the outside.

FExtend the left and right accordion panels to the vertical window sashes. Drill pilot holes and attach the top and bottom corners with 4 type B screws.

side of the bottom of the case using type

A screws, 4 on each side.

Type B screw

Type B screw

Top mounting rail

Type B screw

V-support

Type B screw

11