Standard PS/2 mouse data uses a different data format to IntelliMouse data and so two reset functions are provided on the SmartView. The type of data format expected by the PC depends upon the driver and the type of mouse that was connected when the driver was booted. The following table may be used as a guide. Note that the mouse reset functions predict the likely mouse resolution settings but may not restore the speed or sensitivity of the mouse exactly as they were when the PC originally booted.

Type of mouse / system

Driver type

Likely expected

Suggested

Connected at bootup

 

data format

restoration

PS/2

PS/2 only

PS/2

F5

PS/2

IntelliMouse

PS/2

F5

IntelliMouse / SmartView

PS/2 only

PS/2

F5

IntelliMouse / SmartView

IntelliMouse

IntelliMouse

F6

To restore lost mouse movement on a CPU connected to the SmartView:

1)Select the CPU that has lost its mouse movement

2)Press the select key on the front of the SmartView for 5 seconds until ‘C’ is displayed. You are now in configure mode.

3)To restore a PS/2 mouse connection press

F 5 f

Or, to restore an IntelliMouse connection press

F 6 f

4) Exit from configure mode by typing

Ef

5)Test the mouse movement by moving the mouse a short distance.

F5 - Restore PS/2 mouse function

F6 - Restore IntelliMouse function

SmartView

Installation and Use

Page 18

Page 19
Image 19
Adder Technology SV12PRO, SV16PRO, SV8PRO, SV4PRO manual SmartView Installation and Use