11.From the Network Drivers dialog box, press the Add Adapter... button to enter the Add Network Adapter dialog box. Select Unlisted or Updated Network Adapter and click OK.
12.Windows will prompt a Install Driver dialog box; put the driver diskette into floppy drive then press OK.
13.Select Enhanced mode NDIS3 for.... then press OK.
14.Follow Windows instructions to complete the installation and exit Windows.
15.Reboot your computer and the new settings will take effect.
Windows NT 3.51 Installation
1.Choose Program Manager, Main, Control Panel, Network and remove all existing network components. Remove all adapters first, then servers, then workstations, etc.
2.Choose Program Manager, Main, Control Panel, Ports and remove all serial port support. After all serial port devices are removed, press Close.
Adding PCMCIA to Your Laptop
1.Choose Program Manager, Main, Control Panel, Devices.
2.Select PCMCIA.
3.Press STARTUP.
4.Select BOOT, then press OK.
5.When all PCMCIA adapters are added, press Close and restart Windows. Check the Event Viewer after your system reboots.
Ethernet + Fax/Modem PC Card Installation for NT 3.51
1.Insert the Ethernet + /Fax/Modem multifunction PC Card into one of the PCMCIA slots.
2.Choose Program Manager, Main, Control Panel, Network.
3.Press YES to install network components.
4.Enter the correct path for NT installation media
5.Press “Do not detect for the network adapter” .
6.Open the Network Adapter Card selection box.
7.Select <OTHER> REQUIRES DISK FROM MANUFACTURER and click the CONTINUE button.
Installation 7
