6.Choose My computer, Control Panel, Ports and remove all existing network components.
7.Press CLOSE after all serial port devices are removed.
Ethernet + Fax/Modem PC Card Installation for NT 4.0
1.Insert the Ethernet + Fax/Modem PC Card into a PCMCIA Slot.
2.Start Windows NT 4.0.
3.Login with a full access level i.e. ADMINISTRATOR.
4.Choose My computer, Control Panel, Network.
5.If a Network has not been installed select YES to start Network installation, then press Next and press SELECT FROM LIST button, then press HAVE DISK button.
6.Insert the Ethernet + Fax/Modem driver disk into the floppy drive, then enter the correct path.
7.Select the only choice for the Ethernet + Fax/Modem PC Card, then press OK and
NEXT.
8.Windows NT 4.0 will grant configurations for:
--TCP/IP
--NWLink IPX/SPX
--NetBEUI
...
Typically configurations for each network are unique. Ask your network administrator for help if you want to change them.
9.Click Next twice to use default NETWORK SERVICES settings.
10.Enter the correct path for NT 4.0 system source files.
11.A dialog box will pop up. Give appropriate system resources to the Ethernet + Fax/Modem PC Card; the settings must be unique for this device. Refer to “Resources Recommendation” for NT 3.51 details.
12.Click NEXT twice. Enter COMPUTER NAME then press NEXT.
13.Click FINISH.
If Network has been installed
1.Choose My computer, Control Panel, Network, Adapters.
2.Click ADD to add network adapters.
Installation 9
