2.Insert the driver diskette into the floppy drive and set to the appropriate drive (A:\). Then type INSTALL and press Enter.
3.Select Microsoft LAN Manager from the menu screen.
4.Check the card settings. If current settings are correct, select Start Installation and go to step 5. Otherwise, select Modify Parameters to change settings.
5.Select the appropriate values then press Enter. When you are finished, press OK to exit.
6.The installation program will install all necessary drivers and modify your computers AUTOEXEC.BAT and NET.CFG directories.
7.Select Yes then press Enter to modify the files.
8.Reboot your computer and the new settings will take effect. Example of PROTOCOL.INI:
[PROTMAN]
DRIVERNAME = PROTMAN$ DYNAMIC = YES PRIORITY = NETBEUI
[NETBEUI_XIF] Drivername = netbeui$ SESSIONS = 6 NCBS = 12
BINDINGS = "LMNDIS_NIF" LANABASE = 0
[LMNDIS_NIF]
;protocol.ini session for multifunction LAN/MODEM driver.
IOADDRESS = 0x320 INTERRUPT = 11
DRIVERNAME = LMNDIS$
Installation 5
