GE CGS980 Care and cleaning of the range, Sealed Burner Assemblies, Safety Instructions

Safety Instructions

Care and cleaning of the range.

Be sure electrical power is off and all surfaces are cool before cleaning any part of the range.

If your range is removed for cleaning, servicing or any reason, be sure the anti-tip device is re-engaged properly when the range is replaced. Failure to take this precaution could result in tipping of the range and cause injury.

Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions

Front right burner	Sealed Burner Assemblies
	Turn all controls OFF before removing the
Burner cap	burner parts.
	The round side burner caps and burner
	heads can be lifted off, making them easy to
	clean. The electrodes are not removable.
Burner head	The oval center burner head and cap
	assembly can be lifted off, making it easy
Electrode	to clean. The burner electrode is not
	removable.

Burner base
Make sure the hole in the burner
head is positioned over the electrode	Center
and that the burner head is fully	griddle
inserted inside the burner base.
A small gap between the base and	Burner head
head is normal.
	and cap

assembly

Front left burner, back right burner	Electrode
and back left burner
Burner cap

Burner head

Stability	Use a sewing
chamber	needle or
	twist-tie to
	unclog the
	small hole in
	the burner
Burner base	head.
	Electrode

Make sure the slot in the burner head

is positioned over the electrode.

CAUTION: Do not operate the cooktop without all burner parts and grates in place.

Electrode	Burner head
	Electrode
Front left, back right	Burner base
and back left burner

Front right burner

The electrode of the spark igniter is exposed when the burner head is removed. When one burner is turned to LITE, all the burners spark. Do not attempt to disassemble or clean around any burner while another burner is on. An electric shock may result, which could cause you to knock over hot cookware.

32