Installation Instructions

10INSTALLING THE ANTI-TIP DEVICE

WARNING!

Range must be secured with an approved Anti- Tip device.

Unless properly installed, the range could be tipped by you or a child standing, sitting or leaning on an open door.

After installing the Anti-Tip device, verify that it is in place by carefully attempting to tilt the range forward.

This range has been designed to meet all recognized industry tip standards for all normal conditions.

The use of this device does not preclude tipping of the range when not properly installed.

If the Anti-Tip device supplied with the range does not fit this application, use the universal Anti-Tip device WB2X7909.

A.Mark the wall where the RIGHT EDGE of the range is to be located. Be sure to allow for the countertop overhang if you intend to install the range next to cabinets.

 

Anti-Tip

 

device

Slotted head

 

screw

Wallplate

 

Approx. 20°

 

2 18Marked edge of range

B. Locate the outside edge of the device 218″ toward the center of the range from the marked edge of the range.

C. Using the device as a template, mark the position of the hole for the screw.

D. For wood construction, drill a pilot hole at an angle of 20 degrees from the horizontal. A nail or awl may be used if a drill is not available.

Mount the Anti-Tip device with the screw provided.

For cement or concrete construction, you will need a 1/4″ x 112″ lag bolt and a 1/2″ O.D. sleeve anchor, which are not provided. Drill the recommended size hole for the hardware.

10 INSTALLING THE ANTI-TIP DEVICE (CONT.)

Wallboard

Back of range

 

Anti-Tip device

Wood screw

Install the sleeve anchor into the drilled hole and then install the lag bolt through the device. The bolts must be properly tightened as recommended for the hardware.

E. Slide the range against the wall, and check for proper installation by grasping the front edge of the cooktop and carefully attempting to tilt the range forward.

WHEN ALL HOOKUPS ARE

COMPLETED

Make sure all controls are left in the off position. Make sure the flow of combustion and ventilation air to the range is unobstructed.

CONVERTING TO LP GAS (or

converting back to natural gas from LP)

This range leaves the factory set for use with natural gas. If you want to convert to LP gas, the conversion must be performed by a qualified LP gas installer.

The conversion instructions and LP orifices can be found attached to the range next to the pressure regulator.

Keep these instructions and the orifices in case you want to convert back to natural gas.

50

Page 50
Image 50
GE CGS980 installation instructions Installing the ANTI-TIP Device, When ALL Hookups are Completed

CGS980 specifications

The GE CGS980 range is a standout appliance in the world of cooking, combining state-of-the-art technology with user-friendly features that elevate the culinary experience. Designed with the modern chef in mind, this gas range is appreciated for its precision and versatility, making it an excellent choice for both amateur cooks and seasoned professionals.

One of the most notable features of the GE CGS980 is its powerful gas burners. The range includes an array of burners, each with varying BTU outputs, allowing for both high-heat searing and gentle simmering. The dual-ring burner particularly stands out, providing the ability to switch between lower and higher heat outputs seamlessly. This translates into a more controlled cooking process, enabling users to achieve their desired results with ease.

The oven technology is equally impressive, boasting an advanced convection system that ensures even heat distribution. This means that whether you’re baking delicate pastries or roasting a large turkey, you can expect consistent results every time. The oven also features a self-cleaning mode, making maintenance straightforward and hassle-free, while the heavy-duty oven racks can be adjusted to accommodate various dish sizes.

In terms of design, the GE CGS980 offers a sleek appearance with its stainless steel finish, complementing any contemporary kitchen. The range is equipped with a modern interface that includes knobs for manual control and a digital display for easier monitoring of cooking times and temperatures. This combination of aesthetics and functionality makes the GE CGS980 a centerpiece in any culinary space.

Moreover, the range is equipped with smart technology, allowing users to connect their appliances to Wi-Fi. This feature opens up a world of possibilities, such as remote monitoring and control through a smartphone app, keeping the user informed about what’s cooking, even from a distance. Features such as voice control compatibility with smart home systems further enhance the convenience of the GE CGS980.

Safety is also a priority in the design of this range. The oven includes a safety lock to prevent accidental operation, and the burners have an automatic reignition feature that ensures that if the flame goes out, it will relight without manual intervention.

In conclusion, the GE CGS980 gas range is a perfect blend of power, technology, and design, making it a superb addition to any kitchen. With its robust features and modern conveniences, it supports a wide variety of cooking tasks, making meal preparation not just easier but also more enjoyable for everyone.