Manageable 8/9-Port Switch

Step 8:

Press <esc> to a previous screen as shown in Step 3.

Step 9: Admin. Control

Highlight All Ports and press <enter> to configure at one time.

Or move to highlight each port and press <enter> to configure individually.

Step 10:

For Admin Control, move to highlight Up or Down from Admin Status Options.

Step 11:

The port is set as Admin Down to stop TX/RX transmission. To allow transmission on the port, move to highlight Up from the options in Step 10.

Step 12: Physical Port Address

Press <esc> to a previous screen as shown in Step 1.

Step 13:

Move to highlight Physical Address to view physical port address.

Step 14: Return to Basic Management

Press <esc> to return to [Basic Management] screen when completed.

User’s Manual

30

Page 34
Image 34
GE D-GES7600 manual Admin. Control, Physical Port Address, Return to Basic Management