Manageable 8/9-Port Switch

Step 3: Get Community Name

Move to highlight Get Community Name, and press <enter>.

Enter text and press <enter>.

Step 4: Set Community Name

Move to highlight Set Community Name, and press <enter>. Enter text and press <enter>.

Step 5: Trap Community Name

Move to highlight Trap Community Name 1 and press <enter>. Enter text and press <enter>. Repeat to specify up to three more trap community names.

Step 6: Trap Host IP Address

Move to highlight Trap Host 1 IP Address, and press <enter>. Type an IP address for trap host 1 and press <enter>. Repeat to specify up to two more trap host IP addresses.

Step 7: Cold Start Trap

Move to highlight Cold Start Trap, and press <enter>. Decide to have it Disabled or Enabled.

Step 8: Warm Start Trap

Move to highlight Warm Start Trap, and press <enter>. Decide to have it Disabled or Enabled.

Step 9: Link Down Trap

Move to highlight Link Down Trap, and press <enter>. Decide to have it Disabled or Enabled.

Step 10: Link Up Trap

Move to highlight Link Up Trap, and press <enter>. Decide to have it Disabled or Enabled.

Step 11: Authentication Failure Trap

Move to highlight Authentication Failure Trap, and press <enter>.

Decide to have it Disabled or Enabled.

Step 12: Rising Alarm Trap

Move to highlight Rising Alarm Trap, and press <enter>.

Decide to have it Disabled or Enabled.

Step 13: Falling Alarm Trap

Move to highlight Falling Alarm Trap, and press <enter>.

Decide to have it Disabled or Enabled.

Step 14: Topology Change Trap

Move to highlight Topology Change Trap, and press <enter>.

Decide to have it Disabled or Enabled.

User’s Manual

52

Page 56
Image 56
GE D-GES7600 manual Get Community Name, Set Community Name, Trap Community Name, Trap Host IP Address, Cold Start Trap