Installation Instructions
D. DETERMINING REAR MOUNTING SCREW LOCATIONS
|
| C |
|
| L |
|
|
|
CAUTION: Wear gloves | NOTE: The Rear Wall Template serves | |
to avoid cutting fingers |
| to position the bottom mounting plate and |
on sharp edges. |
| to locate the horizontal exhaust outlet. |
|
|
|
1Use a level to check that the template is positioned accurately.
2Locate and mark at least one stud on the left or right side of the centerline. It is important to use at least one wood screw mounted firmly in a stud to support the weight of the microwave.
Mark three additional, evenly spaced locations for the supplied toggle bolts.
3
Drill holes in the marked locations. If there is a stud, drill a 3⁄16″ hole for wood screws. For holes that don’t line up with a stud, drill a 5⁄8″ hole for toggle bolts.
NOTE: DO NOT MOUNT THE PLATE AT THIS TIME.
10
