GE DE68-02957A, 39-40425 warranty A4. MOUNT THE MICROWAVE OVEN cont, A5. ADJUST THE EXHAUST ADAPTOR

Installation Instructions

A4. MOUNT THE MICROWAVE OVEN (cont.)

3Insert a self-aligning screw through top center cabinet hole. Temporarily secure the oven by turning the screw at least two full turns after the threads have engaged. (It will be completely tightened later.) Be sure to keep power cord tight.

Be careful not to pinch the cord, especially when mounting flush to bottom of cabinet.

Cabinet Front

Cabinet Bottom Shelf

Filler Block

Equivalent to Depth of Cabinet Recess

Self-Aligning Screw

Microwave Oven Top

4Insert 2 self-aligning screws through outer top cabinet holes. Turn two full turns on each screw.

5 Tighten center screw completely.

6Tighten the outer two screws to the top of the microwave oven. (While tightening screws, hold the microwave oven in place against the wall and the top cabinet.)

7Install grease filter. See the Owner’s Manual packed with the microwave.

A5. ADJUST THE EXHAUST ADAPTOR

Open the top cabinet and adjust the exhaust adaptor to connect to the house duct.

Damper

For Front-to-Back or

Side-to-Side Adjustment,

Slide the Exhaust

Adaptor as Needed

A6. CONNECTING DUCTWORK

House Duct

1Extend the house duct down to connect to the exhaust adaptor.

2Seal exhaust duct joints using duct tape.

14